PARTS & ACCESSORIES FOR CT2.0

Parts and accessories designed for CT2.0 to make the trike safe, comfortable and practical on the road, whenever you use it for training, racing, commuting or touring


SEAT PAD

seatpad
Comfortable and ventilated seat pad designed for CT2.0 in three sizes for perfect fit for all riders. Made of Spacer Fabric 3D Mesh, similar ventilation system and life span as Ventisit but softer and less sticky

Use: Training, Racing, Commuting & Touring

Location: Installed on the seat

Compatibility: Fits CT2.0 and the first generation CARBONTRIKES (requires move or add Velcros), fit some recumbent bikes with carbon or fiber glass seat but does not fit most trikes

Price: $127


HEADREST / NECKREST

headrest
BCT tool-free adjustable headrest, 3D printed and injection molded with soft cushion
Can be used both as Neckrest or Headrest
With integrated mount for Tail Light and Safety Flag (with rubber insert)

Use: Training, Racing, Commuting & Touring

Location: Installed on the backrest

Compatibility: Fits only CT2.0, not the first generation CARBONTRIKES but can be fitted to some other recumbent bikes and trikes with carbon or fiber glass seat (requires drilling)
Added note: The cushion is machine washable or can be replaced if it wears out, without the need to replace the entire Headrest

Attention: Red tail light must be used by law when riding trikes in traffic during the night (in most countries); we also recommend using tail light and the Safety Flag during the day when riding trikes in mixed traffic for added visibility and safety. Mount for tail light and the Safety Flag is integrated in this new Headrest

Price (complete): $184
Price (only the cushion as spare part): $48


PEDALS
Double function pedals with SPD on one side (include SPD clips for the shoe) and platform on the other, with bolts keeping shoes in place even in the vertical position when riding the trike (even if we always recomment using SPD for longer trips and pumpy roads)

Low weight: only 360g (13oz)

Use: Training, Racing, Commuting & Touring

Location: Installed in the cranksets

Compatibility: Fits all trikes on the market

Attention: Good enough for most trike riders but cheap enough to replace for riders with special favorite pedals

Price: $43


CARBON REAR FENDER

fender
CT2.0 fender in carbon fiber composite for the rear wheel with 3k glossy finish
Developed together with CT2.0’s frame to fit perfect
Adjustable for different tire size and clearance
Rattle proof and silent even on rough roads
Provides a good looking and lightweight protection from splashes on wet roads as well as road dirt on dry roads

Use: Training, Commuting & touring

Location: Installed in dedicated threads in the frame, in front of the rear wheel

Compatibility: Fits only CT2.0, not the first generation CARBONTRIKES or other trikes
Added note: The CT2.0 is the only trike on the market where both the frame and fender have been designed at the same time to fit perfectly together

Price: $118


MIRRORS LEFT & RIGHT

mirror
BCT rear view mirrors with real scratch proof mirror glass and with aluminum base
Perfect convex shape and size to give a good view back on the road without reducing the view size too much
Easy to adjust, stabile and stays in position even on rough roads
The best trike mirror on the market – period!

Use (mirror only on LEFT side): Training & Racing
Use (mirrors on BOTH sides): Commuting & Touring

Location: Installed on the handle bar, only left side (for right-hand traffic) or both sides

Compatibility: Fits CT2.0 and the first generation CARBONTRIKES and most other trikes with 7/8” (22mm) tube

Attention: Rear view mirror should always be used when riding trikes in mixed traffic for safety reasons

Price (one mirror, Left or Right): $33


SAFETY FLAG

flag
Safety flag with BCT print, made of super bright yellow Hi-Vis fluorescent fabric with bright reflective ends
5 ft long 3-part foldable black fiber glass rod, installed on the trike: 7 ft from the ground
For added visability and safety: With 20" tassel made of orange fluorescent ribbon with bright reflective middle

Use (always): Commuting & Touring
Use (riding in traffic): Training & Racing

Location: Installed in the Headrest or the Flag & Tail Light Mount

Compatibility: Fits CT2.0 and the first generation CARBONTRIKES and most other trikes with flag mount for 6mm rod

Attention: Safety Flag should always be installed when riding trikes in mixed traffic for added visibility and safety

Price: $48


FLAG & TAIL LIGHT MOUNT

flagmount
BCT 3D-printed mount in UV-resistant PET for both the Safety Flag and Tail Light
Place the tail light in perfect position for maximum visability, free from the fender
Fits most bike tail lights on the market using seatpost mount

Use (always): Commuting & Touring
Use (riding in traffic): Training & Racing

Location: Installed on the left side of the backrest

Compatibility: Fits only CT2.0 direct but can be installed on the first generation CARBONTRIKES and other trikes with carbon or fiber glass seat (requires drilling)

Attention: This Flag & Tail Light Mount is not needed when the new 3D printed headrest is used, only for short riders to get the tail light free from the fender
Red tail light must be used by law when riding trikes in traffic during the night (in most countries); we also recommend using tail light and the Safety Flag during the day when riding trikes in mixed traffic for added visibility and safety

Price: $28


HEADLIGHT MOUNT

headlightmount
BCT 3D printed mount in UV-resistant PET and rubber for headlight
Place the headlight in perfect position to see the road and traffic ahead
Fits many of the bike lights on the market that are made to attach on the handlebar (1" tube)

Use (always): Commuting & Touring
Use (night riding): Training & Racing

Location: Installed on the front derailleur tube

Compatibility: Fits CT2.0 and other recumbent bikes and trikes with 1-1/4” (31.8mm) derailleur tube

Attention: White headlight must be used by law when riding trikes in traffic during the night (in most countries)

Price: $28


BIKE COMPUTER MOUNT

bike computer mount
BCT mount for bike computer, smartphone etc
With 22mm (7/8") carbon fiber tube and CNC machined aluminum base
Adjustable and lightweight yet stiff enough to handle larger GPS bike computers and smartphones

Use: Training, Racing, Commuting & Touring

Location: Installed on the headsets, left and/or right side

Compatibility: Fits CT2.0 and most of the first generation CARBONTRIKES but does not fit other trikes

Price: $42


RACK SYSTEM

Rack & bags

CT2.0 rack system made of high strength (6061-T6) aluminum and rubber to fit standard panniers with self-locking (Quick-Lock) hooks e.g. Ortlieb in a perfect position for maximum stability and minimum air resistance
Use proven, practical, affordable and waterproof panniers instead of having to use special non-waterproof recumbent banana bags and still get the same benefits
Lightweight, yet strong enough to handle full 2x20L touring bags (40lb/18kg)
The CT2.0 and the Rack System were designed together to create the Ultimate Fast Touring Machine!

Use: Touring & Commuting & Training (if the space inside the frame is not enough)

Location: Installed directly on the frame in two dedicated threads on each side behind the seat

Compatibility: Fits only CT2.0, not the first generation CARBONTRIKES or other trikes

Price: $124


EASY BOOM ADJUST SYSTEM

Easy Boom Adjust System

CT2.0 chain gobbler that makes it easy to adjust the boom length without having to change the chain length
Recommended for trikes with several users, for demo trikes and for riders who wants to adjust the trike several times to find the perfect boom position
Allow 5 inches of boom adjustment, equal to 10 inches in different riders length
The Easy Boom Adjust System is easy to install and use, does not affect the ground clearance, adds very little resistance and is almost noiseless. 3D printed in PET and rubber with aluminum tube and Terracycle chain idlers

Use: Demo, Training & Commuting (with several users)

Location: Installed on the boom and on the front part of the frame

Compatibility: Fits only CT2.0, not the first generation CARBONTRIKES or other trikes

Attention: This is the only Easy Boom Adjust System (aka chain gobbler) that fit CT2.0, other systems on the market are made for round booms and does not fit CT2.0

Price: $187


HYDRATION SYSTEM
Easy to reach drink water system with 2 liter (1/2 Gallon) bladder inside the frame
Complete with fabric protection bag, mount and quick release for the hose
Fillable with the bladder inside the frame or outside from bottles or water taps

Use: Training, Racing & Touring

Location: Inside the frame (bladder) and behind/under the seat on the right side (hose)

Compatibility: Fits only CT2.0 and some trikes from the first generation CARBONTRIKES prepared for hydration system (with hole in the frame for the hose), does not fit other trikes

Attention: This Hydration System is based on a heavily modified water bladder system from Source (Ultimate), most other water bladders e.g. Camelback, including bladders from Source without modifications does not fit CT2.0 or the first generation CARBONTRIKES

Price (complete system): $87
Price (spare parts; bladder, tubes etc without protection bag): $69
Price (protection bag as spare part): $25


CARBON BOTTLE CAGES

bottle cage
Bottle Cages made of carbon fiber composite
Extra good grip protects the bottles from falling out in the upside-down position under the seat
Easy to reach (only valid for CT2.0’s from 2023 and later)
Easier and more convenient to use than the Hydration System
Sold as pair (Left & Right) with assymetric design

Use: Training, Racing, Commuting & Touring

Location: Installed under the seat and/or the backrest

Compatibility: Fits only CT2.0 direct but can be installed on the first generation CARBONTRIKES and other trikes with carbon or fiber glass seat (requires drilling), also CT2.0’s before 2023 may need drilling to place the bottle cages in position easy to reach. Can be installed on other trikes and bikes prepared for bottle cages but requires different bolts

Attention: Other bottle cages can be installed on CT2.0 but special fasteners (bolts, nuts & spacers) may be needed (as the trike frame doesn´t have dedicated threads for the cages and the surface is not flat). Bottle cages mounted under the seat must have extra good grip to keep the bottle in place due to the upside-down position

Price (one pair): $87


BRAKE LEVEL PROTECTIONS

Brake Level Protections
Protections made of soft 3D printed rubber covering the brake levels to protect from water and road dirt that can affect the function of the brakes

Use: Training, Commuting & Touring (on wet or dirty roads)

Location: Brake Levels

Compatibility: Only fit the brakes used on CT2.0 (Tektro Gemini SL). Does not fit the first generation CARBONTRIKES or other trikes

Attention: Riders not using these protections should clean the brake levels regularly

Price (one pair): $32


CRANKSET PROTECTION

crankset protection
3D printed crankset protection kit designed for the crankset used on CT2.0 (SRAM Force 22 Carbon)
With chainring protection in PET plastic and stainless fasteners that fit into the chainring bolts. Also include rubber crankarm protections
Protects both the chainring, the crankarms and the clothes (from chain oil) during daily use

Use: Commuting, Touring & Racing (when required)

Location: Crankset

Compatibility: Fits SRAM Force 22 Carbon crankset (installed on CT2.0), Rival 22 and RED 22 May also fit other cranksets with 5 holes and BCD 130mm (if one of the bolts is under the crank arm). Does not fit most Shimano cranksets installed on the first generation CARBONTRIKES

Attention: Chainring protection is required at some bike and trike races to protect other riders

Price: $56


FRAME BAG

Included with all CT2.0 from 2024 and later!

BCT nylon bag to fit inside the trike frame, include multi tool and mini pump to adjust the trike when getting the trike ready for rides or on the road, additional space for spare tubes, wallet, phone, keys or other stuff needing protection when stored inside the trike frame

Use: Commuting, Touring & Racing

Location: Inside the frame

Compatibility: Fits CT2.0 and first generation CARBONTRIKES

Price: $67

BUNDLES FOR CT2.0

Bundles with complete set of parts and accessories to make it easy and convenient for you to get your CT2.0 directly ready for the road, for training or commuting or even touring. Saves money compare to buying the parts separately and you get all parts installed on the trike, ready to use imediatelly. Recommended for all riders using the CT2.0 in mixed trafic

The Bundles are only sold together with CT2.0 and does not add any cost for handling and shipping or assembly, complete bundles are not sold to old trikes (but you can buy the parts separately)


RACE BUNDLE
Minimized bundle just with the parts needed to get the CT2.0 ready for training and racing in daytime traffic

Include: Seat Pad (Small/Medium/Large), Neckrest (inc Mount for Flag & Tail Light), Left Mirror (for right-hand traffic), Safety flag, Pedals

Bundle Price: $400

Bundle Saving: $35 compare to buying the parts separately


ON THE ROAD BUNDLE
Everything you need to get the CT2.0 ready for the road for training and commuting, to make the trike safe and comfortable, just add lights

Include: Seat Pad (Small/Medium/Large), Neckrest (inc Mount for Flag & Tail Light), Carbon Rear Fender, Mirrors (Left & Right), Safety Flag, Pedals, Headlight Mount, Bike Computer Mount, Brake Level Protections

Bundle Price: $600

Bundle Saving: $88 compare to buying the parts separately


TOURING BUNDLE
Everything you need to get the CT2.0 ready for long trips, for fast touring and commuting
Just add pannier bags and your CT2.0 is the Ultimate Fast Touring Machine!

Include: Seat Pad (Small/Medium/Large), Neckrest (inc Mount for Flag & Tail Light), Carbon Rear Fender, Mirrors (Left & Right), Safety Flag, Pedals, Headlight Mount, Bike Computer Mount, Rack System, Bottle Cages or Hydration System (choose), Brake Level Protections, Crankset Protection

Bundle Price: $850

Bundle Saving: $105 compare to buying the parts separately

TOOLS FOR CT2.0

Tools to maintain CT2.0 in addition to standard bike tools used in most cases. Not recommended for the usual CT2.0 rider but only for pro trike mechanics


TRIKE HANGER
This trike hanger makes it possible to hang the CT2.0 in a standard bike stand (i.e. Park Tool Repair Stand). It is ideal when service with the trike, assembly and adjusting parts and allow free rotation for easy access (may be limited by the bike stand). Stabile construction in aluminum with a 50 mm tube for the bike stand and 3D printed rubber details against the trike frame as protection

Use: For serious trike service

Location: Attaches to the frame without tools at the place for the backrest

Compatibility: Fits only CT2.0

Attention: Only include the hanger for the trike frame, needs a bike stand to be complete

Price: $137


FRONT WHEEL TOOL SET
Tools for removing the front wheels, reach the bearings and lace the wheel spokes, include adapter for the front wheel bubs to fit standard wheel truing stands, end cap tool and Allen key

Use: Used when servive the trike after long-term use, when trueing the front wheels or when replacing the bearings

Compatibility: Fit CT2.0 and the first generation CARBONTRIKES with SL hubs, does not fit other trikes

Price: $58


LASER WHEEL ALIGNMENT TOOL
Equipment for very precise alignment of the trike steerings with 2 lasers and a pop-up projector wall

Use: Normally only used when parts of the steering is replaced (as all trikes after 2023 is perfectly alligned from the factory and should not be adjusted later), but can be used for CT2.0 sold before 2023 (as these trikes may not be perfectly aligned) or if somebody has changed the perfect wheel alignment

Location: The lasers fit with magnets to the brake rotors, the projector wall is placed 30 to 60ft in front of the trike

Compatibility: Fit CT2.0, the first generation CARBONTRIKES and some other trikes with disk brakes but the projector wall may need modification to fit trikes with different wheel track

Price: $237

The prices are valid until next update. CT2.0 and parts and accesories are sold directly to customers within United States and international. All prices are without sales tax. Customers may have to pay use tax directly to the state. Specifications and prices are subjected to changes without notice.

FREE Shipping, Handling and Assembly for parts and accessories sold together with trikes (contiguous US). Cost for shipping and handling may be added for parts and accessories sold separately.

To order a trike or parts click on SALES

© 2008-2023 CARBONTRIKE - All rights reserved.